Mounting
Instructions for Bike-Vise: 16 photos with FAQ
click
on pictures to enlarge
Photo
1: 
Tools for Installation
-Drill and a 11/32" bit for
drilling holes.
-16mm socket and wrench (5/8" can be used).
-Measuring tape to "square" unit to trailer walls
-Pencil
-Bike Vise kit hardware
-"Thread Lock"
may be used, if so desired, in place of lock-nuts.
Photo
2: 
Assemble Left Side of Bike Vise First
-Use the 4 shortest
bolts to mount the screwjack shaft to the mount.
-Use 2 Long
bolts to mount the Left Leg to the yoke.
-Secure all bolts with 2
nuts (i.e. a "locking nut") provided with kit.
Photo
3: 
Placement of Bike Vise
-Allow adequate distance from the side
of the trailer to turn handle.
-Allow for motorcycle clearance
from side of trailer.
-Mark & Drill the hole indicated by the
YELLOW pencil first.
-Place a bolt into drilled hole for
vise alignment.
-Go to next photo